中文
English
Español
介绍
Introduction
The ventilated ton bag structure design is composed of a cylindrical bag body, a material inlet, a material outlet, a sling and a soft tray at the bottom. The air-permeable ton bag has a cylindrical shape with small ends and a large middle. The bag has a layered structure, including five layers of woven layer, heat insulation layer, filter layer, adsorption layer and breathable layer. A see-through window made of transparent PET material can be designed in the middle of the side of the bag body of the air-permeable ton bag. The see-through window is designed to facilitate the observation of the material in the bag.
Compared with the general ton bag, the main difference between the vented ton bag is that it has an extra layer of venting layer for packaging. The material of the air permeable layer of the ton bag is polyethylene film, and the air permeable layer is designed with many air holes, and the aperture of the air holes is generally larger than that of the heat insulation layer. The design of the air-permeable ton bag should not only be conducive to ventilation and heat dissipation, but also have waterproof and moisture-proof performance, so it is necessary to cover a layer of waterproof membrane on the surface of the air-permeable material. The thickness of the waterproof membrane is designed to be 70-120 microns.
In the design of the inlet and outlet, the inlet and outlet of the air-permeable ton bag are generally designed in a barrel shape, wherein the inlet is designed at the upper end of the bag body, and the outlet is designed at the lower end of the ton bag. The feeding and discharging ports of the ton bags are designed as variable diameter sections to facilitate the feeding and discharging of materials and the opening of the bundle. In order to enhance the stability of the ton bag, it is necessary to seal the contact surface between the bag body, the upper reducing section and the inlet and outlet with a double sewing thread structure. In addition, the edge position of the variable diameter section o
定制
Custom made
Large-capacity one grab/two grab ton bags can be customized according to the different material openings and linings.
Double feed openings can be set at the top and bottom to support various customization and matching to improve loading efficiency
定制-副本1
Advantage
-Single-ring and double-ring big bags represent special solutions for handling and storing materials using big bags

-A hook or similar device can be used to lift one or more large bags at the same time, which has significant advantages compared with standard bulk bags that usually require a forklift and can only carry one large bag at the same time.

-It is easier to load bulk carriers or trains without using a forklift

-The most cost-effective big bag
图文展示
ABUIABAEGAAgxenjhAYo_PuNqwYwiwg4uAI
标准型
下料口
上料口
双料口
标准型
下料口
上料口
双料口


自由容器
Standard
The feed opening
Feeding port
Double spout
自由容器

can be set lining


One grab or two grab bags can support 5 different linings, which is conducive to the storage and transportation of different products

介绍1-副本1

Loosely inserted tubular liner


For single-lift and double-lift big bags, the most common liner is loosely inserted tubular liner. For most fertilizer producers, this type of solution is economical and affordable. The liner is usually welded at the bottom and open at the top. The inner lining can be closed with a cable tie on the top.


Loose valved tubular bushing


The loosening is similar to a loose tubular liner, but with additional welding at the top and a hole for filling on the top edge.








Loosely inserted liner with inlet or outlet nozzles


This liner is a bottle-shaped liner welded to an inlet or outlet nozzle. The backing paper can be loosely inserted into the bag.


   

Dangling template


The suspended template is fixed in the loop.


This has the advantage that the liner cannot be moved inside the big bag.



Note: A conductive bag with inner lining can be customized. When the conductive wire is not connected to the ground or is damaged, it is prohibited to use this product.